Reining Saddle FAQ

Technically yes — a cutting saddle is a western saddle and is not prohibited by NRHA rules. However, it is not advisable from a performance standpoint. Cutting saddles are designed with a very deep, forward-balanced seat and high cantle to secure the rider during a horse's independent cow work. This seat geometry works against you in reining patterns — it will push you into the back of the seat during a rundown and make it difficult to maintain the quiet, centered position reining judges reward. Use a purpose-built reining saddle for reining competition.

The NRHA does not require a back cinch, but nearly all competitive reiners use one. A back cinch prevents the rear of the saddle from lifting during hard stops and spins — a practical necessity in competition. If a back cinch is used, NRHA rules require that it be connected to the front cinch via a hobble strap to prevent it from sliding back. A loose back cinch that slides to the horse's flank can cause dangerous reactions.

Silver is not required in NRHA Open or Non Pro classes. However, silver appointments on saddle, bridle, and other tack add to the overall presentation and are traditional in the western show pen. At big events like the NRHA Futurity, most competitors do ride with silver packages for the full presentation effect. At local and regional shows, silver is common but not universal — presentation matters but is not judged as a separate criterion in NRHA reining.

Yes, there are no restrictions based on competitor age regarding saddle size. However, a properly fitting saddle is essential for safe and effective riding regardless of age. A youth rider placed in an adult-sized saddle (16" or larger) will struggle to maintain correct position. Most youth competitors ride in 14.5"–15.5" seats depending on their body size. Proper fit is always the priority.

A properly fitting saddle will: (1) sit level on the horse's back without tipping forward or back, (2) have at least 2–3 finger widths of gullet clearance off the spine, (3) have bars that lie flat against the back without rocking or bridging (concentrated pressure at front and back bars with a gap in the middle), and (4) not impinge on the horse's shoulder blade movement. After riding, look at the sweat pattern under the saddle pad — uniform moisture indicates even pressure distribution. Dry spots under an otherwise sweaty pad indicate pressure points.

A saddle that's too narrow will pinch the horse's trapezius muscles along the spine and restrict shoulder movement. Over time this causes back soreness, resistance to saddling, reluctance to move forward, and eventually back muscle atrophy. In the show pen, a horse in pain will not perform sliding stops or spins with the freedom and willingness that judges reward. Tree fit is the single most important variable in equine performance and welfare.

Horse backs change — especially in young horses (2–5 years old) who are developing topline muscle, horses coming back from a break or injury, and horses whose conditioning level changes significantly. It's good practice to check saddle fit at least twice a year, and whenever you notice a change in your horse's way of going or willingness. A good saddle maker or qualified saddle fitter can evaluate your current saddle and, if needed, recommend reflocking or tree modification.

Measure your inseam (floor to crotch) in a sitting position. As a general starting point: under 28" inseam → 14.5"–15" seat; 28"–31" → 15"–15.5"; 31"–34" → 16"–16.5"; over 34" → 16.5"–17.5". These are starting points — body proportion, riding position, and personal preference all affect ideal seat size. Whenever possible, sit in a saddle before purchasing. In reining, many riders size down half an inch from their trail riding preference for a closer, more connected feel.

Price range is wide depending on construction quality and whether you buy new or used. Entry-level production reining saddles start around $800–$1,500 but often compromise on tree quality and leather. Mid-range production and semi-custom saddles run $1,500–$3,500. Custom saddles from established reining saddle makers typically run $3,500–$8,000 or more depending on tooling complexity and maker reputation. Certified used saddles from reputable sources like David Solum's program typically range from $1,200–$3,500 for quality maker saddles — excellent value for serious competitors.

Quality reining saddles hold value very well — often better than most large-ticket equestrian purchases. A custom saddle from a reputable maker, properly cared for, will retain 60–80% of its original value for many years. The used market is active and competitive because serious horse people recognize quality workmanship and understand that a $3,000 used saddle from a top maker outperforms a $3,000 new production saddle by a significant margin. Good saddles are investments, not expenses.

For serious competitors, yes — the premium for a properly custom-fitted saddle is justified by the performance and longevity benefits. A tree built to your horse's specific measurements, a ground seat shaped to your anatomy, and leather quality that will last decades represent genuine value. For recreational or entry-level competitors, a quality certified used saddle from a maker like David Solum's program often provides 90% of the performance benefit at 40–60% of the new custom cost.

Regular care extends saddle life significantly: (1) After every ride, wipe down sweat with a clean damp cloth and allow to dry naturally — never near direct heat. (2) Condition leather monthly (or more often in dry climates) with a quality leather conditioner like Leather Therapy, Leather New, or Bick 4. Avoid petroleum-based products that dry leather over time. (3) Clean with a pH-neutral leather cleaner before conditioning. (4) Store in a cool, dry location — tack rooms with humidity extremes damage leather quickly. (5) Keep your saddle on a proper rack — never rest it on its side or on the horn.

For competition saddles ridden regularly, have a qualified saddle maker or fitter inspect the tree, rigging, and all stress points annually. Rigging hardware should be checked closely — a cracked dee ring or failing rigging plate can be a safety hazard. Stitching in high-stress areas (rigging attachment, latigo holder, fender tops) should be restitched when it shows significant wear. Budget $100–$300 annually for preventive maintenance on a well-used competition saddle.

Surface mold does not necessarily ruin a saddle. Clean affected areas thoroughly with a solution of equal parts white vinegar and water, wiping with a clean cloth (do not saturate leather). Allow to dry completely, then condition well. Mold that has penetrated deeply into the leather is harder to address and may have compromised leather integrity. Have a saddle maker evaluate severe mold cases before assuming the saddle is unsalvageable. Preventing mold means storing saddles in low humidity with airflow — avoid sealed tack trunks in warm climates.

Every used saddle listed on ReiningSaddles.com has been personally inspected by David Solum — a certified used saddle dealer with decades of experience in the reining and western performance market. Certification means the tree has been checked for integrity, the rigging and hardware are sound, and the leather is accurately described. It does not mean the saddle is new or without wear, but it does mean there are no hidden structural defects and the condition is accurately represented in the listing.

Return and exchange terms are set by David Solum directly and should be discussed before purchase. In general, all used saddle sales are final unless there is a material misrepresentation of condition. This is why David strongly encourages buyers to call or WhatsApp before purchasing — discussing your horse's build, withers, and back length before committing to a saddle reduces the risk of a poor fit significantly. Remote buyers can send photos of their horse's back and withers for guidance.

Remote purchases are common in the certified used market. David Solum walks remote buyers through the process: (1) discuss your horse's measurements and your seat size preference, (2) review all photos and the detailed listing description, (3) ask David specific questions about tree width, ground seat shape, rigging, and leather condition, (4) discuss shipping logistics and cost. Many buyers also ask for additional photos or video. David's phone and WhatsApp are the most efficient way to work through this — (417) 793-1403.

Current certified used inventory includes saddles from Superior Saddlery (including Pinnacle/Maschke builds), Bob's Custom Saddle, Donn Leson, Martin Saddlery, Calvin Allen, Tim Bauer, and others. Inventory rotates regularly. Check the used saddles page for current availability, or contact David to be notified when a specific maker or size comes in.

Financing options are not offered through ReiningSaddles.com directly. Contact David Solum to discuss payment arrangements. Some buyers use third-party equine financing services or personal financing options. All payment terms are handled directly between the buyer and David Solum.

Superior Saddlery by Andy Mashke is distinguished primarily by its SYMMETREES™ technology — proprietary saddle trees manufactured in-house since 2003 with a precision focus on left-right symmetry and consistent fit. Most saddle makers source trees from outside suppliers; Superior builds their own. The trees are glass-encased wood construction and are reproducible to spec, meaning a replacement tree years later will match the original. Superior saddles are ridden by some of the most decorated names in NRHA history: Shawn Flarida, Craig Schmersal, Casey Deary, Jason Vanlandingham, and Mandy McCutcheon among them.

Bob's Custom Saddle (Bobs Custom Saddlery) is one of the most recognized names in western performance saddlery, known for consistent quality across a wide range of models — from entry-level production to full custom NRHA competition saddles. Bob Avila, a World Champion reiner and trainer, has long been associated with Bob's Custom Saddle designs. Their saddles are prized in the used market for holding value and offering excellent construction at a wide range of price points.

New Superior Saddlery saddles are custom order through Andy Mashke. Lead times vary based on current order volume — typically several months. The process begins with a consultation on tree width, seat size, tooling preference, silver package, and leather color. Contact Andy through the new saddles page or reach David Solum if you have questions about which model suits your discipline and budget before committing to a custom order.

Yes, David Solum regularly ships to European buyers, particularly Germany, the Netherlands, France, and Austria where NRHA reining is popular and growing. International buyers are responsible for all customs duties, VAT, and import fees applicable in their country — these can be substantial in the EU and should be researched before purchasing. David can provide shipping quotes and works with buyers on packing to minimize damage risk in transit. WhatsApp is the most efficient communication channel for international buyers.

Saddles are typically shipped in custom-built wooden crates or heavy-duty boxes with substantial foam padding to protect the tree, horn, and cantle. Proper packing is critical — a tree cracked in transit is a total loss. David Solum takes shipping preparation seriously for this reason. Shipping costs vary by destination and carrier but are typically $150–$400 within the continental US and $400–$800+ for international shipments depending on destination and declared value requirements.

Yes. EU buyers importing saddles from the US will typically owe import VAT (which varies by country — Germany is 19%, France 20%, etc.) plus any applicable customs duty. The combined cost can add 20–25% or more to the saddle's purchase price. It is the buyer's responsibility to research and account for these costs before purchasing. David Solum can provide accurate invoice documentation to support customs clearance. Many European buyers find that even with import costs, certified used NRHA-quality saddles from the US represent strong value compared to European market pricing for equivalent maker quality.

The saddle tree is the rigid internal frame that gives a saddle its shape and distributes the rider's weight across the horse's back. Everything else — leather, padding, rigging — is built over the tree. A tree that doesn't fit the horse's back will cause pressure points regardless of how much padding is added. Tree materials range from wood (traditional, lighter, repaired if broken), wood encased in fiberglass or resin (stronger, weatherproof), to full synthetic (extremely durable, consistent). The best performance saddle trees — including Superior's SYMMETREES™ — are wood encased in fiberglass for strength and consistency.

The best reining saddle leather comes from Hermann Oak Leather Company in St. Louis — widely considered the gold standard for American saddlery. Look for full-grain leather (the surface is the natural grain of the hide, not a corrected/buffed surface). Full-grain leather breathes, develops patina, and holds up to decades of use. Cheaper saddles use top-grain or genuine leather — surface-corrected hides that are weaker and don't age as well. When evaluating a used saddle, full-grain leather that's been properly conditioned will be supple and consistent; cheap leather will show cracking and surface separation.